Our club took part in Operation Bunker at the Kelvedon Hatch ‘Secret’ Nuclear Bunker at the weekend. Operation Bunker was a military vehicle, memorabilia and re-enactment weekend attended by vintage military personnel from all over the South East.
We operated the bunker special call GB0SNB from beside the main mast, using SSB, CW and Data modes. In total we contacted 368 stations in 47 countries around the world. Our best DX was into Chile at 11,330 KM on 14 MHz digital modes. I used my IC-7200 for data on Saturday, with my end fed half wave vertical on 20m and higher bands. On the Sunday, we used an IC-7100.
You can take a look at the log (and other statistics) by clicking here. Also, some images from the weekend are in the HDARC gallery.
The club operating at GB0SNB ‘Operation Bunker’ 2015
At the weekend, we took part in the RSGB RoPoCo (ROtating POst COdes) contest, which is always fun. We operated with Dave’s call, M0TAZ, from a portable location. Last year, we did really well, and we had zero errors in the log. Activity seemed a bit lower this year, but we did start 10 minutes late as Dave M0TAZ forgot to bring a key part of the equipment, the battery! We worked 47 stations in an hour and twenty minutes.
RoPoCo 2015 – After setting up the antenna, Dave has to drive home and get the battery he forgot to bring!
Its always funny when you are given odd exchanges. I remember last year we was given 001 to pass on rather than a postcode and this year was no different, with a few odd exchanges but we just passed them on as there’s not a lot you can do! We used my IC-7200 with a half wave inverted v, 11m at the centre.
RoPoCo 2015 – the setup inside the car.
Look forward to next year and I’m sure
we Dave wont forget the battery next time 🙂
I have always been a Linux fan and have owned a Raspberry Pi for some time which I use for all sorts of things. A new model was released in February, the Raspberry Pi 2 model B, so I got one. It’s quite impressive with its quad core 900MHz cpu and 1GB RAM.
Now my old model B+ was redundant, I decided to set it up as a home server to run some services that I was previously using a cheap VPS for. The server is at http://j0hn.uk and is pictured below.
The B+ has a 700 MHz (clocked to 800MHz) ARM1176JZF-S CPU, 512MB RAM and is using an 8GB micro SD for Storage. It is a very capable little machine and is running many server applications. Power is provided from an iPhone charger at present, but I am currently building a UPS for the Pi, but as of today, its been up since first boot, 26 days ago.
The Raspberry Pi is a great tool for all sorts. More info is at raspberrypi.org