This page contains construction details on a 2 metre 144MHz VHF Yagi beam antenna, designed for portable use. Since an old 5 element version (v1) of my antenna was shown in the July 2011 edition of RadCom, a few people have contacted me asking for some information on how it was constructed. It has gone through a few revisions over the years (this is version 4) and is now a 6 element Yagi Uda (poor Uda never seems to get a mention), based on a DK7ZB design, with a little tweaking in EZNEC.
The challenge for this antenna was that it had to be compact enough to walk up a mountain and be very quick and easy to assemble and disassemble. 6 elements was chosen, as the boom length is 2m (6.5ft) which keeps it portable, whilst still having good gain. The next problem was how to build it so it can be put together quickly. After a lot of thinking, I decided to use wooden clothes pegs to mount the elements and driven element. Previous versions I have made used large screw terminal blocks, perspex, plastic booms, but this is certainly the best version so far!
Note: The version I built, as described on this page, is optimised for SSB at the low end of the 2m band (144.3MHz) and will not be suitable for using at or above 146MHz. Bill, VE7WNO built this Yagi and observed the SWR shot up above 146MHz (see SWR plot above 146MHz here), so I have designed a version of this antenna centered on 146MHz for more broadband coverage of the USA/Canadian allocation of 144-148MHz. The dimensions for the all band coverage version can be seen here and SWR plot is here. It also uses ¼” tubing (6.35mm) instead of 6mm. See Bills comments at the bottom of the page for more info. OK, on with the 144MHz build…
The dimensions are below:
Of course there are many ways to fabricate a Yagi antenna, but hopefully this page gives you some idea of some options. Below are some photos showing in detail how the antenna is put together.
Gil, F4WBY built this antenna to use with his new Icom IC-251E and made a video of his build, which you can see below. Cheers Gil!
Some photos of using my original homemade Yagi are below. I shall add some of the new one shortly!
If you decide to build this antenna, I wish you good luck. I would love to hear your results if you do, please get in touch! John.